PM513-BT10
Projecta Power Managmement Kit - PM535 and 10" Screen
or 4 payments of A$624.75 with
PM513-BT10
The kit features the PM535 Power Management Unit paired with a large 10” Bluetooth touchscreen for advanced power control and monitoring. Ideal for larger setups, it offers seamless system integration, detailed performance insights, and efficient multi-source charging.
Engineered to last
Technical Specs
KEY SPECIFICATIONS
PARTNUMBER CONTAINS 1
PM535
PARTNUMBER CONTAINS 2
PMD-BT10C
PARTNUMBER CONTAINS 3
PMLCDC-7IN-5M
PARTNUMBER CONTAINS 4
PMAC
PARTNUMBER CONTAINS 5
PMBS-3M
PARTNUMBER CONTAINS 6
PMTS-5M
SPARE BAG: 40A fuse, 15A Fuse, Fuse puller
BATTERY CONNECTOR
Screw terminal (20mm²)
LOAD CONNECTOR
Wago2604-111 (4mm²), Wago2604-1103 (6mm²)
MATERIAL (ENCLOSURE MATERIAL)
Metal and plastic
AC MAINS
NOMINAL INPUT VOLTAGE
230–240V 50Hz
POWER FACTOR
0.95
INPUT CURRENT AT FULL LOAD
2.5A
BATTERY
VEHICLE BATTERY
12V DC
VEHICLE BATTERY VOLTAGE RANGE
12.8–16V DC
HOUSE BATTERY
12V DC
HOUSE BATTERY VOLTAGE RANGE
10.5–16V DC
PV (SOLAR)
CHARGER TYPE
MPPT
OPEN CIRCUIT VOLTAGE
42V DC
MAX SUPPLY CURRENT
30A
MAX CHARGING CURRENT
30A
DC-DC CHARGER
ALTERNATOR INPUT VOLTAGE RANGE (INTELLIGENT TYPE)
12–16V DC
AUTOMATIC ACTIVATION D+
Yes
ABSORPTION CHARGE VOLTAGE DEFAULT SETTING
14.7V DC
FLOAT CHARGE VOLTAGE DEFAULT SETTING
13.7V DC
CHARGE CURRENT
30A Continuous
TOTAL CURRENT OF LOAD AND CHARGING
30A
MAXIMUM CHARGING EFFICIENCY
0.96
TEMPERATURE COMPENSATION DEFAULT SETTING
-4mV/°C/CEL
VOLTAGE COMPENSATION
No
CONNECT DELAY TIME
5 Sec
DISCONNECT VOLTAGE
12V DC
DISCONNECT DELAY TIME
5 Sec
CHARGE MODE
CHARGE ALGORITHMS
5 Stages
BATTERY TYPE
AGM/GEL/LFP (LiFePO4)/WET
START VOLTAGE
>2A
BULK CURRENT
30A (Max)
ABSORPTION VOLTAGE
14.4/14.1/14.2/14.7V DC
FLOAT VOLTAGE
13.5/13.5/13.5/13.7V DC
MAXIMUM BATTERY CAPACITY
1200Ah
MAXIMUM BATTERY QUANTITY
Dependent on battery capacity
POWER SUPPLY MODE
NOMINAL OUTPUT VOLTAGE
12.8V (14.2V for LFP when battery current > 2A)
RATED OUTPUT CURRENT
35A (Continuous)
EFFICIENCY
0.88
WORKING TEMPERATURE
-40°C to +60°C (40°C - 60°C derating)
BATTERY DISCONNECT
DISCONNECT VOLTAGE
LEAD ACID: 10.5VDC (Default) Lithium FP [LiFePO4]: 11.2VDC (Default)
DELAY OFF TIME
60 sec
RECONNECT VOLTAGE
LEAD ACID: 11.5VDC (Default) Lithium [LiFePO4]: 12.2VDC (Default)
CURRENT DRAW ON BATTERY
ONLY BATTERY AND LOAD SWITCH ON
700mA
ONLY BATTERY AND LOAD SWITCH OFF
300mA
POWER SWITCH OFF
<1mA
FUSED OUTPUTS
QUANTITY
15
RATED CURRENT
15A * 14, 40A * 1
PROTECTION
SHORT CIRCUIT ON OUTPUTS
Fuse blown
REVERSE POLARITY
Diode reverse isolation
OVERLOAD PROTECTION
Derate the output until overload is removed
BATTERY CHARGER OVER TEMPERATURE
Shut down PM535
AMBIENT OVER TEMPERATURE
Alarm
BATTERY OVER VOLTAGE LIMITS
Battery charger disconnected, load disconnected
COOLING
Forced cooling
IP RATING
IP20
APPROVALS
Electrical: AS/NZS 60335.2.29 EMC: CISPR14
DIMENSIONS & WEIGHT
Dimensions
350 x 325 x 89mm
Weight
3.8kg
PARTNUMBER CONTAINS 1
PM535
PARTNUMBER CONTAINS 2
PMD-BT10C
PARTNUMBER CONTAINS 3
PMLCDC-7IN-5M
PARTNUMBER CONTAINS 4
PMAC
PARTNUMBER CONTAINS 5
PMBS-3M
PARTNUMBER CONTAINS 6
PMTS-5M
SPARE BAG: 40A fuse, 15A Fuse, Fuse puller
BATTERY CONNECTOR
Screw terminal (20mm²)
LOAD CONNECTOR
Wago2604-111 (4mm²), Wago2604-1103 (6mm²)
MATERIAL (ENCLOSURE MATERIAL)
Metal and plastic
NOMINAL INPUT VOLTAGE
230–240V 50Hz
POWER FACTOR
0.95
INPUT CURRENT AT FULL LOAD
2.5A
VEHICLE BATTERY
12V DC
VEHICLE BATTERY VOLTAGE RANGE
12.8–16V DC
HOUSE BATTERY
12V DC
HOUSE BATTERY VOLTAGE RANGE
10.5–16V DC
CHARGER TYPE
MPPT
OPEN CIRCUIT VOLTAGE
42V DC
MAX SUPPLY CURRENT
30A
MAX CHARGING CURRENT
30A
ALTERNATOR INPUT VOLTAGE RANGE (INTELLIGENT TYPE)
12–16V DC
AUTOMATIC ACTIVATION D+
Yes
ABSORPTION CHARGE VOLTAGE DEFAULT SETTING
14.7V DC
FLOAT CHARGE VOLTAGE DEFAULT SETTING
13.7V DC
CHARGE CURRENT
30A Continuous
TOTAL CURRENT OF LOAD AND CHARGING
30A
MAXIMUM CHARGING EFFICIENCY
0.96
TEMPERATURE COMPENSATION DEFAULT SETTING
-4mV/°C/CEL
VOLTAGE COMPENSATION
No
CONNECT DELAY TIME
5 Sec
DISCONNECT VOLTAGE
12V DC
DISCONNECT DELAY TIME
5 Sec
CHARGE ALGORITHMS
5 Stages
BATTERY TYPE
AGM/GEL/LFP (LiFePO4)/WET
START VOLTAGE
>2A
BULK CURRENT
30A (Max)
ABSORPTION VOLTAGE
14.4/14.1/14.2/14.7V DC
FLOAT VOLTAGE
13.5/13.5/13.5/13.7V DC
MAXIMUM BATTERY CAPACITY
1200Ah
MAXIMUM BATTERY QUANTITY
Dependent on battery capacity
NOMINAL OUTPUT VOLTAGE
12.8V (14.2V for LFP when battery current > 2A)
RATED OUTPUT CURRENT
35A (Continuous)
EFFICIENCY
0.88
WORKING TEMPERATURE
-40°C to +60°C (40°C - 60°C derating)
DISCONNECT VOLTAGE
LEAD ACID: 10.5VDC (Default) Lithium FP [LiFePO4]: 11.2VDC (Default)
DELAY OFF TIME
60 sec
RECONNECT VOLTAGE
LEAD ACID: 11.5VDC (Default) Lithium [LiFePO4]: 12.2VDC (Default)
ONLY BATTERY AND LOAD SWITCH ON
700mA
ONLY BATTERY AND LOAD SWITCH OFF
300mA
POWER SWITCH OFF
<1mA
QUANTITY
15
RATED CURRENT
15A * 14, 40A * 1
SHORT CIRCUIT ON OUTPUTS
Fuse blown
REVERSE POLARITY
Diode reverse isolation
OVERLOAD PROTECTION
Derate the output until overload is removed
BATTERY CHARGER OVER TEMPERATURE
Shut down PM535
AMBIENT OVER TEMPERATURE
Alarm
BATTERY OVER VOLTAGE LIMITS
Battery charger disconnected, load disconnected
COOLING
Forced cooling
IP RATING
IP20
APPROVALS
Electrical: AS/NZS 60335.2.29 EMC: CISPR14
Dimensions
350 x 325 x 89mm
Weight
3.8kg
In the wild
The Feed
Join the community
